Gree GVA24AL-K3NNC7A/I Service Manual page 25

1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air conditioner, indoor unit will give out a sound.
2
SAVE button
Under cooling mode, press this button to start up or turn off energy-saving function.When energy-saving function is started up,
"SE" will be shown on remote controller, and air conditioner will adjust the set temperature automatically according to
ex-factory setting to reach to the best energy-saving effect. Press this button again to exit energy-saving function.
3
FAN button
Pressing this button can set fan speed circularly as: auto (AUTO), low(
Note:
Under AUTO speed, air conditioner will select proper fan speed automatically according to ex-factory setting.
It's Low fan speed under Dry mode.
Turbo cannot be set in FAN mode.
4
MODE button
Press this button to select your required operation mode.
AUTO
When selecting auto mode, air conditioner will operate automatically according to the sensed temperature. Set temperature
can't be adjusted and will not be displayed as well. Press "FAN" button can adjust fan speed. Press "
fan blowing angle.
After selecting cool mode, air conditioner will operate under cool mode. Cool indicator "
button to adjust set temperature. Press "
When selecting dry mode, the air conditioner operates at low speed under dry mode. Dry indicator "
Under dry mode, fan speed can't be adjusted. Press "
When selecting fan mode, the air conditioner will only blow fan, no cooling and no heating. Fan indicator "
Press "FAN" button to adjust fan speed. Press"
When selecting heating mode, the air conditioner operates under heat mode. Heat indicator "
button to adjust set temperature. Press " FAN" button to adjust fan speed. Press "
unit won't receive heating mode signal. If setting heat mode with remote controller, press ON/OFF button can't start up the unit).
Note:
For preventing cold air, after starting up heating mode, indoor unit will delay 1~5 minutes to blow air (actual delay time is depend on indoor
ambient temperature).
Set temperature range from remote controller: 16~30
5
▲/ button
Press "▲" or " " button once increase or decrease set temperature 1
on remote controller will change quickly . On releasing button after setting is finished, temperature indicator on indoor unit will change
accordingly. ( Temperature can't be adjusted under
When setting TIMER ON, TIMER OFF, press "▲" or "
6
Cool button
Press this button, unit will operate in cool mode.
7
Heat button
Press this button, unit will operate in heat mode.
22
Auto
COOL DRY FAN HEAT
FAN" button to adjust fan speed. Press "
" / "
auto mode)
), medium (
" / "
" / " " button to adjust fan blowing angle.
" button to adjust fan blowing angle.
" / "
(61-86°F); Fan speed: auto, low speed, medium speed, high speed, turbo speed.
(°F). Holding "▲" or "
" button to adjust time. (Refer to TIMER button for details)
), high( ), turbo( ).
" / " " button can adjust
" on indoor unit is ON. Press "▲" or "
" button to adjust fan blowing angle.
" on indoor unit is ON.
" on indoor unit is ON.
" on indoor unit is ON. Press "▲" or "
" button to adjust fan blowing angle. (Cooling only
" button, 2s later, set temperature
Technical Information
Service Manual
"
"