Gree GVA24AL-K3NNC7A/I Service Manual page 69

Step
8.Remove upper cover, horizontal louver, swing board
Remove 2 screws at the upper part of the
a
upper cover and two screws at the back
side of the air-outlet panel.
After removing the air-guiding connecting
b
robe, and then pull the horizontal louver
outwards to remove it.
c After removing the air swing connection
rod, pull the swing board inwards to
remove it.
9.Remove swing motor and air-guide motor
a
Remove screws used for fixing the air-
guide motor and the remove the air-guide
motor.
b
Remove screws used for fixing the motor
cover, remove the motor cover and then
remove the swing motor.
10.Remove wind board
Remove 11 screws used for fixing the wind
board and then remove the wind board.
66
Procedure
swing board
air swing
connecting rod
swing motor
screw
motor cover
wind board
upper cover
screw
horizontal louver
air-guiding connecting rod
air-guide motor
screw
Installation and Maintenance
Service Manual