Chapter 5 Cable Connection Procedures; Power Connections - Cisco IAD2801 Series Installation Manual

Cable Connection Procedures
This document describes how to connect your Cisco IAD2801 series integrated access devices to a power
source and to networks and external devices. It includes the following sections:
•
•
•
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1030
Warning This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017

Power Connections

This section explains how to connect AC power to a Cisco IAD2801.
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
The installation must comply with all required electrical codes applicable at the installation site.
Note
OL-12433-01
Power Connections, page 5-1
Connecting WAN, LAN, and Voice Cables, page 5-2
Connecting to a Console Terminal or Modem, page 5-3
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
5
C H A P T E R
5-1