Specifications - Cisco IAD2801 Series Installation Manual

Chapter 1 Overview
Table 1-4 Interface Numbering on the Cisco IAD2801
Model Slot0
IAD2801-2BRI-A/K9 VIC2-2BRI-NT/TE-P
IAD2801-4BRI-A/K9 VIC2-2BRI-NT/TE-P
IAD2801-4BRI-S/K9 VIC2-2BRI-NT/TE-P
1. The factory installable or field upgradeable LTD option includes: HWIC-AP-AG-E and HWIC-AP-G-E, HWIC-4ESW, and VIC-4FXS/DID.

Specifications

Table
Table 1-5
Description
Dimensions (H x W x D)
Weight
AC input power
•
•
•
•
Power consumption
Console and auxiliary ports
Operating humidity
Operating temperature
Nonoperating temperature
Noise level, standard power
supply
Safety compliance
EMC compliance
OL-12433-01
Slot1
HWIC-1ADSL
HWIC-1ADSL
HWIC-4SHDSL
1-5, list Cisco IAD2801 specifications.
Cisco IAD2801 Specifications
Input voltage
Frequency
Input current
Inrush surge current
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
Slot2
Not available
VIC2-2BRI-NT/TE-P
VIC2-2BRI-NT/TE-P
Specification
1.72 x 17.49 x 16.5 in. (4.4 x 44.4 x 41.9 cm).
10.9 lb (4.9 kg) with standard power supply if fully populated with
modules
100 to 240 VAC, autoranging
47 to 63 Hz
2 A
50 A maximum, one cycle (–48V power included)
105 W with standard power supply (maximum)
RJ-45 connector
5 to 95%, noncondensing
32 to 104° F (0 to 40° C)
–40 to 162° F (–40 to 72° C)
39 dBA for local temperatures < 90° F (32° C)
47 dBA for local temperatures between 90° F and 116° F (47° F)
52.6 dBA for temperatures above 116° F (47° F)
UL 60950-1; CAN/CSA C22.2 No. 60950-1; IEC 60950-1;
EN 60950-1; AS/NZS 60950.1
FCC Part 15; ICES-003 Class A; EN50082-1; EN55022 Class A;
CISPR22 Class A; EN55024/CISPR24; AS/NZS 3548 Class A;
VCCI Class A; EN 300386; EN61000-3-3; EN61000-3-2;
EN61000-6-2
Specifications
Slot3
1
LTD option
1
LTD option
1
LTD option
1-7