Chapter 4 Power, Cable, And Antenna Connection Procedures; Power Connections - Cisco CISCO1841 - 1841 Integrated Services Router Hardware Installation Manual

Power, Cable, and Antenna Connection
Procedures
This chapter describes how to connect your Cisco 1800 series fixed-configuration router to a power
source and to networks and external devices. It includes the following sections:
•
•
•
•
To see translations of the warnings that appear in this publication, see the
Note
Safety Information for Cisco 1800 Integrated Services Routers (Fixed)
routers, the
802.11a/b/g and 802.11b/g Radios
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning Do not work on the system or connect or disconnect cables during periods of lightning activity.
Statement 1001

Power Connections

This section explains how to connect AC power to a Cisco 1800 series fixed-configuration router. It
covers the following topics:
•
•
Warning Read the installation instructions before connecting the system to the power source. Statement 1004
OL-6425-03
Power Connections, page 4-1
Connecting WAN and LAN Cables, page 4-2
Connecting to a Console Terminal or Modem, page 4-5
Connecting the Radio Antennas to the Wireless Router, page 4-8
Declarations of Conformity and Regulatory Information for Cisco Access Products with
Connecting Routers to AC Power, page 4-2
Connecting WAN and LAN Cables, page 4-2
Cisco 1800 Series Integrated Services Routers (Fixed) Hardware Installation Guide
C H A P T E R
document that accompany your router.
4
Regulatory Compliance and
document and for wireless
4-1