Safety Recommendations - Cisco IAD2801 Series Installation Manual

Preinstallation Requirements and Planning
This document describes site requirements and equipment needed to install your Cisco IAD2801. It
includes the following sections:
•
•
•
•
•
•
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030

Safety Recommendations

Follow these guidelines to ensure general safety:
•
•
•
•
•
•
For safety information you must know before working on your Cisco router, see the
Note
Cisco 3800 Series Integrated Services Routers Regulatory Compliance and Safety Information
document.
OL-12433-01
Safety Recommendations, page 2-1
General Site Requirements, page 2-3
Installation Checklist, page 2-4
Creating a Site Log, page 2-5
Inspecting the Router, page 2-6
Required Tools and Equipment for Installation and Maintenance, page 2-6
Keep the chassis area clear and dust-free during and after installation.
If you remove the chassis cover, put it in a safe place.
Keep tools and chassis components away from walk areas.
Do not wear loose clothing that could get caught in the chassis. Fasten your tie or scarf and roll up
your sleeves.
Wear safety glasses when working under conditions that might be hazardous to your eyes.
Do not perform any action that creates a hazard to people or makes the equipment unsafe.
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
2
C H A P T E R
Cisco 2800 and
2-1