Preface; Audience; Topics Covered By Hardware Documents - Cisco IAD2801 Series Installation Manual

Audience

Audience
This documentation is designed for the person installing, configuring, and maintaining the router, who
should be familiar with electronic circuitry and wiring practices and has experience as an electronic or
electromechanical technician. It identifies certain procedures that should be performed only by trained
and qualified personnel.

Topics Covered by Hardware Documents

Table 1
Table 1
Topic
Overview
Preinstallation Requirements and
Planning
Port and Cable Information
Chassis Installation Procedures
Cable Connection Procedures
Power Up and Initial Configuration
Procedures
Troubleshooting
Installing and Upgrading Internal
Modules
Removing and Installing CompactFlash
Memory Cards
Cisco IAD2801 Series Integrated Access Devices Hardware Installation Guide
vi
lists the topics covered by these hardware documents.
Hardware Documentation for Cisco IAD2801
Description
This document. Describes the features and warnings of
Cisco IAD2801 series integrated access devices.
Describes the features and specifications of
Cisco IAD2801 series integrated access devices.
Describes safety recommendations, site requirements, and
required tools and equipment, and includes an installation
checklist.
Provides information about cables needed to install your
Cisco IAD2801 series integrated access devices.
Describes how to install your Cisco IAD2801 on a desktop
or in a rack.
Describes how to connect your Cisco IAD2801 to a power
source and to networks and external devices.
Describes how to power up your Cisco IAD2801 and
perform an initial configuration to provide network access.
Describes how to isolate problems, read LEDs, and
interpret error and recovery messages.
Describes how to install or upgrade modules that are
located internally within the router, such as memory
modules, PVDMs, and power supplies.
Describes hardware installation procedures that do not
require opening the chassis.

Preface

OL-12433-01