Cervis Inc. Safety Precautions - Cervis Warrior 32 HH2S-9XL10 Manual

Cervis Inc. Safety Precautions


Read and follow all instructions.

Failure to abide by Safety Precautions may result in equipment failure, loss of
authority to operate the equipment, and personal injury.

Use and maintain proper wiring. Follow equipment manufacturer instructions.
Improper, loose, and frayed wiring can cause system failure, equipment damage, and
intermittent operation.

Changes or modifications made to equipment not expressly approved by the
manufacturer will void the warranty.

Owner/operators of the equipment must abide by all applicable Federal, State, and
Local laws concerning installation and operation of the equipment. Failure to comply
could result in penalties and could void user authority to operate the equipment.

Make sure that the machinery and surrounding area is clear before operating. Do not
activate the remote control system until certain that it is safe to do so.

Turn off the handheld remote remove and power from the receiver before attempting
any maintenance. This will prevent accidental operation of the controlled machinery.

Use a damp cloth to keep units clean. Remove mud, concrete, dirt, etc. after use to
prevent obstructing or clogging the buttons, levers, wiring, and switches.

Do not allow liquid to enter the handheld or receiver enclosures. Do not use high
pressure equipment to clean the handheld remote or receiver.

Disconnect the receiver before welding on the machine. Failure to disconnect the
receiver may result in destruction of or damage to the receiver.

Operate and store units only within the specified operation and storage temperatures
defined in the specifications of this document.

Keep high-energy RF devices away from handheld remotes. Activation of high-power
communication radios, for instance, in close proximity to handheld remotes can
result in interference and "false" circuit activation.

Do not key 2-way radios while using the handheld remote.
U101.1.0
ii