Mx240 Chassis Lifting Guidelines - Juniper MX240 Hardware Manual

3d universal edge router
Hide thumbs Also See for MX240:
Table of Contents

Advertisement

MX240 3D Universal Edge Router Hardware Guide
Related
Documentation

MX240 Chassis Lifting Guidelines

Related
Documentation
448
Varning! Läs installationsanvisningarna innan du kopplar systemet till dess
strömförsörjningsenhet.
General Safety Guidelines and Warnings on page 439
Laser and LED Safety Guidelines and Warnings on page 455
Grounded Equipment Warning on page 453
The weight of a fully configured chassis is about 128 lb (58.1 kg). Observe the following
guidelines for lifting and moving the router:
Before moving the router, read the guidelines in
on page 111
to verify that the intended site meets the specified power, environmental,
and clearance requirements.
Do not attempt to lift a fully configured router by yourself. Using a mechanical lift to
maneuver the router into a rack is recommended. If a lift cannot be used, a minimum
of three people must lift the router, and you must remove components from the chassis
before lifting.
Before lifting or moving the router, disconnect all external cables.
To lift routing devices and components, use the following lifting guidelines:
Up to 39.7 lbs (18 kg) 1 person lift.
39.7 lbs (18 kg) to 70.5 lbs (32 kg) 2 or more person lift.
70.5 lbs (32 kg) to 121.2 lbs (55 kg) 3 or more person lift.
Above 121.2 lbs (55 kg) material handling systems (such as levers, slings, lifts and
so on) must be used. When this is not practical, specially-trained persons or systems
must be used (riggers or movers).
As when lifting any heavy object, lift most of the weight with your legs rather than your
back. Keep your knees bent and your back relatively straight and avoid twisting your
body as you lift. Balance the load evenly and be sure that your footing is solid.
General Safety Guidelines for Juniper Networks Devices
General Safety Warnings for Juniper Networks Devices
MX240 Site Preparation Checklist on page 111
Removing Components from the MX240 Router Before Installing it without a Lift on
page 183
Installing the MX240 Chassis in the Rack Manually on page 189
Installation Safety Warnings for Juniper Networks Devices
"MX240 Site Preparation Checklist"
Copyright © 2017, Juniper Networks, Inc.

Advertisement

Table of Contents
loading

Table of Contents