Using Code Reader Memory Viewing Data In Memory - Zurich ZR11 Owner's Manual

Using Code Reader Memory
VIEWING DATA IN MEMORY
When you retrieve DTCs from a vehicle, the data is saved to the Code
Reader's memory.
Each time you retrieve DTCs, existing data in the Code
Reader's memory is overwritten with the new data.
VIEWING DATA IN MEMORY
When you turn the Code Reader on while NOT connected to a vehicle,
and data is currently saved in the Code Reader's memory, the Code
Reader enters Memory mode. You can view DTCs and Live Data stored
in the Code Reader's memory.
1. With the Code Reader NOT connected
to a vehicle, press and release the
POWER/LINK
Code Reader on.
If the Code Reader's batteries are
low, a warning message displays.
Replace the batteries before con-
tinuing.
2. If more than one vehicle is stored in the
Code Reader's memory, the Vehicle
Selection menu displays. Use the UP
and
necessary, to highlight the desired
vehicle, then press the ENTER
button.
If
currently stored in the Code
Reader, an advisory message
displays. Press the M button to
return to the Main Menu.
The Memory System Menu displays.
3. Use the UP
buttons, as necessary, to highlight the
DTCs you wish to view, then press the
ENTER
The Code Reader displays the
"priority" DTC.
If there are no DTCs currently
stored in the Code Reader's
memory, an advisory message
shows on the display.
80
button to turn the
DOWN buttons,
there are no
and DOWN
button.
as
vehicles
ZR11