Additional Tests System Test Menu - Zurich ZR11 Owner's Manual

In addition to retrieving Diagnostic Trouble Codes (DTCs), you can use
the Code Reader to perform additional diagnostic tests, to view
diagnostic and vehicle information stored in your vehicle's on-board
computer, and to configure the Code Reader for your particular needs.
Additional tests and related functions are accessed through the Main
Menu. The following functions are available:
System Tests – Displays the System
Test menu, which lets your retrieve and
view results for the O2 Sensor Test and
OBD Monitor Test, and lets you initiate
a test of the vehicle's EVAP system.
Vehicle Information – Displays the
Vehicle Info menu, which lets you
retrieve and view reference information
for the vehicle under test.
Oil Reset – Lets you reset the Oil Maintenance Light.
DLC Locator – Lets you find the location of the Data Link
Connector (DLC) for a specified vehicle.
Battery Reset – Lets you reset the battery monitor system after
battery replacement.
Battery/Alternator Monitor – Performs a check of the vehicle's
battery and alternator system to ensure the system is operating
within acceptable limits.
Trip Cycle Procedure – Lets you view trip cycle procedures for a
selected vehicle monitor.
Firmware Version – Displays the Code Reader's firmware version.
Tool Library – Displays the Tool Library menu, which provides
access to OBD1 and OBD2 DTC libraries and to definitions for
Monitor icons and LED indications.
Tool Settings – Displays the Tool Settings menu, which lets you
make several adjustments and settings to configure the Code
Reader to your particular needs.
The System Tests and Vehicle Information options are
shown only when the Code Reader is in Global OBD2 mode.
SYSTEM TEST MENU
Additional tests are accessed through the Mode Test menu. The
following functions are available:
O2 Sensor Test - Retrieves and displays O2 sensor monitor test
results from your vehicle's on-board computer.
OBD Monitor Test - Retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored.
EVAP Test - Performs a leak test for the vehicle's EVAP system.
Additional Tests
SYSTEM TEST MENU
57