Viewing Vehicle Information - Zurich ZR11 Owner's Manual

EVAP Test
The EVAP Test function lets you initiate a leak test for the vehicle's
EVAP system.
The Code Reader does not perform the leak test, but signals
to vehicle's on-board computer to initiate the test. The vehicle
manufacturer determines the criteria and method for stopping
the test once it has been started. BEFORE using the EVAP
Test function, refer to the vehicle's service repair manual to
determine the procedures necessary to stop the test.
1. From the System Test menu, use the
UP and DOWN
necessary, to highlight EVAP Test, then
press the ENTER
2. A "One moment please..." message
displays while the request is sent to the
vehicle's on-board computer.
Some vehicle manufacturers do not
allow Code Reader's or other
external devices to control vehicle
systems. If the EVAP Test is not
supported by the vehicle under test,
an advisory message shows on the
Code Reader's display. Use the UP
necessary, to highlight Back, then
press the ENTER
return to the Select Sensor screen.
3. When the EVAP leak test has been
initiated by the vehicle's on-board
computer,
shows on the Code Reader's display.
Use the UP
buttons, as necessary, to highlight Back,
then press the ENTER
return to the System Test menu; or,
press the M button to return to the Main
Menu.

VIEWING VEHICLE INFORMATION

The Vehicle Information function offers three options for retrieving
reference information for the vehicle under test; Vehicle ID, Available
Modules and IPT (In-Use Performance Tracking).
Retrieving Vehicle ID Information
The Vehicle ID function is applicable to model year 2000 and
newer OBD2-compliant vehicles.
buttons as
button.
and DOWN
a confirmation
and DOWN
Additional Tests
VIEWING VEHICLE INFORMATION
buttons, as
button to
message
button to
61