Zurich ZR11 Owner's Manual page 61

The Select Sensor screen displays.
The screen shows all O2 sensors
applicable to the vehicle under test.
If O2 sensor test data is not
presently stored in the vehicle's
computer, an advisory message
shows on the Code Reader's
display. Press the M button to
return to the Main Menu.
If O2
supported by the vehicle under
test, an advisory message shows
on the Code Reader's display.
Press the M button to return to the
Main Menu.
3. Use the UP
as necessary, to highlight the O2 sensor
for which you wish to view test results,
then press the ENTER
4. When test results have been retrieved,
data for the selected sensor test will
show on the Code Reader's display.
5. When you have finished viewing the retrieved test data, use the UP
and DOWN
ENTER
6. Repeat steps 3 through 5 to view test results for additional sensors.
When you have finished viewing the retrieved test data use the UP
and DOWN
Sensor screen, then press the ENTER
System Test menu; or, press the M button to return to the Main Menu.
OBD Monitor Test
The OBD Monitor Test function retrieves and displays test results for
emission-related powertrain components and systems that are not
continuously monitored. The tests available are determined by the
vehicle manufacturer.
The Code Reader does not perform the OBD monitor test, but
retrieves results from the most recently performed tests from
the on-board computer's memory. You may retrieve OBD
monitor test results for only one test at any given time.
1. From the System Test menu, use the UP
buttons, as necessary, to highlight OBD Monitor Test, then press
the ENTER
sensor tests
and DOWN
button.
buttons, as necessary, to highlight Back, then press the
button to return to the Select Sensor screen.
buttons, as necessary, to highlight Back on the Select
button.
Additional Tests
SYSTEM TEST MENU
are not
buttons,
button to return to the
and DOWN
59