VIEWING THE FIRMWARE VERSION - THE TOOL LIBRARY
If a Trip Cycle Procedure for the
selected Monitor is not available,
an advisory message shows on
the Code Reader's display. Use
the UP
buttons, as necessary, to highlight
Back, then press the ENTER
button to return to the Main Menu.
6. The Trip Cycle Procedure screen shows
the specific set of operating procedures
that ensure the vehicle is driven in such
a way that all the required "Enabling
Criteria" for the Monitor to run and
complete its diagnostic testing are met.
Use the UP
buttons, as necessary, to view the
entire screen.
7. When you are finished viewing the Trip Cycle Procedures, press the
ENTER
press the M button to return to the Main Menu.
VIEWING THE FIRMWARE VERSION
1. Use the UP
buttons, as necessary, to highlight
Firmware Version in the Main Menu,
then press the ENTER
The Firmware Version screen dis-
plays.
The screen shows the Code Reader's
current firmware version, bootloader
version and database version.
2. Press the M button to return to the Main
Menu.
THE TOOL LIBRARY
The Tool Library contains valuable reference information for the Code
Reader. The following functions are available:
Tool Icons – Shows the full names for the I/M MONITOR STATUS
icons shown and descriptions of informational icons on the Code
Reader's display.
and DOWN
and DOWN
button to return to the Trip Cycle Procedures menu, or,
and DOWN
button.
Additional Tests
73