Viewing Abs Dtcs - Zurich ZR11 Owner's Manual

Using the Code Reader

VIEWING ABS DTCs

The Code Reader will display a code
only if codes are present in the
vehicle's computer memory. If no
codes are present, a "No OEM
Enhanced DTC's are presently stored
in the vehicle's computer" is displayed.
Press the SYSTEM MENU
to return to the System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Code Reader's communication link with the vehicle's
computer disconnects. To re-establish communication, press the
POWER/LINK
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the Code Reader returns to the "Priority" Code.
To view additional enhanced DTCs, repeat steps 1 through 4,
above.
To exit the enhanced mode, press the SYSTEM MENU
button to return to the System Menu. Use the UP
DOWN
press the ENTER
VIEWING ABS DTCs
Refer to Vehicle Applications - ABS on page 87 for vehicle
makes covered.
Reading ABS DTCs
1. When ABS is chosen from the System
Menu, a
message displays while the Code
Reader retrieves the selected DTCs.
If ABS functionality is not supported
by the vehicle under test, an
advisory message shows on the
Code Reader's display. Press the
SYSTEM MENU
to the System Menu.
If the Code Reader fails to link to the
vehicle's computer, a "Communication
Error" message shows on the Code
Reader's display.
- Ensure your vehicle is OBD2
compliant.
COVERED on page 2 for vehicle
compliance verification information.
44
button again.
buttons, as necessary, to highlight Global OBD, then
button to return to the Global OBD2 mode.
"One moment
button to return
See VEHICLES
button
please"
and
ZR11