Zurich ZR11 Owner's Manual page 44

Using the Code Reader
VIEWING OEM ENHANCED DTCs
The Code Reader will display a code
only if codes are present in the
vehicle's computer memory. If no
codes are present, a "No OEM
Enhanced DTC's are presently stored
in the vehicle's computer" is displayed.
Press the SYSTEM MENU
to return to the System Menu.
3. If more than one code was retrieved press the DTC/FF button, as
necessary, to display additional codes one at a time.
Whenever the Scroll function is used to view additional codes,
the Code Reader's communication link with the vehicle's
computer disconnects. To re-establish communication, press the
POWER/LINK
4. When the last retrieved DTC has been displayed and the DTC/FF
button is pressed, the Code Reader returns to the "Priority" Code.
To view additional enhanced DTCs, repeat steps 1 through 4,
above.
To exit the enhanced mode, press the SYSTEM MENU
button to return to the System Menu. Use the UP
DOWN
press the ENTER
Volvo Enhanced DTCs
When Volvo OEM Enhanced is chosen
from the System Menu, the Code Reader
retrieves OEM enhanced DTCs from the
vehicle's computer.
1. A "One moment please" message
displays
retrieves the selected DTCs.
If the Code Reader fails to link to the
vehicle's computer, a "Communication
Error" message shows on the Code
Reader's display.
- Ensure your vehicle is OBD2
compliant.
COVERED on page 2 for vehicle
compliance verification information.
42
In the case of long code definitions, a small arrow is
shown in the upper/lower right-hand corner of the code
display area to indicate the presence of additional
information. Use the UP
as necessary, to view the additional information.
button again.
buttons, as necessary, to highlight Global OBD, then
button to return to the Global OBD2 mode.
while the Code
See
and DOWN
button
Reader
VEHICLES
buttons,
and
ZR11