Mocka Toy Box Assembly Instructions

Wooden toy box

Wooden Toy Box

Assembly Instructions

Thank you for your purchase.

Please follow the instructions below for correct assembly.

Phillips & Flathead screwdrivers required

mocka.co.nz | mocka.com.au

*We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use.

Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.

Table of Contents

Need help?

Do you have a question about the Toy Box and is the answer not in the manual?

Page 1 Wooden Toy Box Assembly Instructions Thank you for your purchase. Please follow the instructions below for correct assembly. *We recommend using a Flathead screwdriver to tighten all locking nuts 100% before first use. Phillips & Flathead screwdrivers required Please clear any loose wood from the locking nut holes before inserting the nut to ensure it locks 100%.
Page 2 Wooden Toy Box Assembly Instructions To assemble the Toy Box first insert 4x wood dowels (H) into each front Fasten side panel [1] to panels [2] and [3] using 4x bolts (A) and 4x nuts and back panel [2] and [3].
Page 3 Wooden Toy Box Assembly Instructions Next slide the base panel [5] into the grooved slots in the panels. Repeat Step 2. Fasten side panel [1] to panels [2] and [3] using 4x bolts (A) and 4x nuts (B). Ensure the grooves on the panels all align. Tighten all bolts with a screwdriver.
Page 4 Assembly Instructions Attach the two brackets (E) to the spaces in panel [3] using 2x small Then fasten the Toy Box lid [4] to the brackets (E) using 2x small screws screws (C) in each. Tighten screws with a screwdriver.
Page 5 Wooden Toy Box Jolt Wardrobe Assembly Instructions ASSEMBLY INSTRUCTIONS Attach the compression hinge (F) in place using 4x screws (D). Ensure Ensure all screws and bolts are secure but not over tightened before the hinge is fastened to both lid [4] and back panel [3] using a use.