Removal From The Isofix Platform; Shock Absorber - KIDDY Evoluna i-Size 2 Instruction Manual

EN
Place the carriage in the foremost position. Slide the side releasing
slide at the knee of the platform to the back (fig. 15, no. 1) and pull the
carriage forward at the same time (fig. 15, no. 2).
Now place the Evoluna i-Size 2 from above onto the Isofix platform,
so that the locking bars are in the grooves of the platform (fig. 16).
If necessary, press the infant carrier down.
The green display's at the front and side of the carriage indicates
whether the seat is locked securely (fig. 17). If the green display's are
not visible this means that the Evoluna i-Size 2 has not been properly
fastened to the platform!
Now you can decide whether you want to use the Evoluna i-Size 2 in
the seated position (fig. 18, no. 1) or in reclined position (fig. 18, no. 2).
Simply adjust the position with the carry handle (see point 5.1).
The final step involves pushing the releasing slide (at the side of the
knee) back (fig. 19, no. 1) and securely sliding the carriage at the pad-
ding of the vehicle seat's backrest (fig. 19, no. 2). Now let the releasing
slide go. The next locking position can be found by moving the carriage.
The carriage must be securely locked and if this is the case, the green
display will become visible (fig. 19, no. 3).

7.1.3 Removal from the Isofix platform

To remove the Evoluna i-Size 2 from the Isofix platform, keep the re-
lease handle for the infant carrier, which can be found above the front
cover, pulled (fig. 20, A) and lift the infant carrier from the Isofix plat-
form (fig. 20, B).
Your Isofix platform is also equipped with a mechanism to release
the infant carrier. If you pull the releasing handle at the front of the
carriage (fig. 21, A), you can remove the seat in an upward movement
(fig. 21, B).

7.1.4 Shock absorber

The Evoluna i-Size 2 is equipped with shock absorbers on the carrying
handle, which in case of a side impact increase the safety of the child
14