Use In The Vehicle; Installation With The Isofix Platform; Seat Selection; Installation Steps On The Isofix Platform - KIDDY Evoluna i-Size 2 Instruction Manual

7. Use in the vehicle

7.1 Installation with the Isofix platform

7.1.1 Seat selection

Read up all the necessary information about the use of
child restraint systems in your vehicle owner's manual.
Never fix the Evoluna i-Size 2 with the vehicle seat belt
(fig. 14)!
In connection with the Isofix platform, the Evoluna i-Size 2
may be used on all i-Size vehicle seats. Kiddy also allows
the installation on Isofix vehicle seats that are listed in the
vehicle type list (fig. 14).
The latest version of the vehicle type list is always available for down-
load at www.kiddy.de/typelist_isofixbase.
Rear-facing child restraint systems may never be used
with an activated front airbag (fig. 14)!
In some vehicles due to the lack of space it might not be possible to
use the reclined position.
Traces of use or discolouration can appear on some vehicle seat cov-
ers made from sensitive materials (e.g. velour, leather etc.) if car seats
or platforms are used. To avoid this we recommend to place a seat
cover shield or protection mat underneath the product.

7.1.2 Installation steps on the Isofix platform

First the Isofix platform has to be properly mounted in the vehicle.
For this purpose, please refer to the instruction manual for the Isofix
platform.
EN
13