General Operation - Pyle PLCD19XMR Owner's Manual

OPERATION

GENERAL OPERATION

SWITHCHING ON/OFF THE UNIT
Pressing PWR button (9) to switch on or
turn off the unit. When system power turns
on, the system is returned to previous
mode.
FACEPLATE RELEASE
Press OPEN button (7) to slide down the
removable faceplate.
SOUND ADJUSTMENT
Press SEL/MENU button (10) shortly to
change audio mode through volume, bass,
treble, balance, and fader mdoes, Press
VOL button (11) or VOL
to adjust the selected mode. When the
currently displayed function has not been
adjusted for several seconds, the mode
shall return to volume position and display
will return to normal radio, CD or CDC
display.
Volume Bass
Volume
Press SEL/MENU button (10) one time.
Adjust volume level by VOL button (11)
or VOL button (12).
Notes:
The unit is initially set to volume mode.
Bass
Press SEL/MENU button (10) two times.
Adjust bass level by VOL button (11) or
VOL button (12).
Treble
Press SEL/MENU button (10) three times.
Adjust treble level by VOL button VOL
button (11) or VOL
Balance
Press SEL/MENU button (10) four times.
Adjust sound balance between left and
right speakers by VOL
VOL button (12).
Fader
Press SEL/MENU button (10) five times.
Adjust sound balance between front and
rear speakers by VOL
VOL button (12).
MENU SELECTION FUNCTION
Hold press SEL/MENU (10) for several
seconds to enter menu select function,
then step short press SEL/MENU (10) to
button (12)
Treble Balance
button (12).
button (11) or
button (11) or
select different set mode and separately
to press VOL
button (12) to select your requisite as
following order.
BEEP ON/OFF
CLOCK ON/OFF WHILE POWER OFF
FREQ/CLOCK/NO PRI PRIORITY
For detailed operations, please see below:
BEEP ON/OFF
Hold press SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press VOL button (11) or VOL
button (12). to select BEEP on or BEEP
OFF. When beep on, the beep in generated
when every button is pressed. When beep
off, the beep is disabled when press any
button.
Program power on volume level
Hold press SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press SEL/MENU button (10)
shortly one time to select "program power
Fader
on volume level" mode. And then you can
press VOL
(12) to select the level when the unit turns
on.
USA/EUR
Hold press SEL/MENU button (10) for
several seconds, when BEEP ON/BEEP
OFF appears, press SEL/MENU button
(10) shortly two times to select "USA/EUR"
mode. And then you can press VOL
button (11) or VOL button (12) to select
USA or European radio frequency spacing.
- USA radio spacing is 200k for FM and
10k for AM. This is the default frequency
spacing.
- European radio spacing is 50k for FM
and 9k for AM.
CLOCK ON/OFF while power off
Hold press SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press SEL/MENU button (10)
shortly three times to select "clock on/off
while power off" mode. And then you can
press VOL
(12) to select if the clock is to be displayed
while power off.
FREQ/CLOCK/NO PRI priority
Hold press SEL/MENU button (10) for
several seconds, when BEEP ON/OFF
appears, press SEL/MENU button (10)
shortly four times to select
11
button (11) or VOL
PROGRAM POWER ON VOLUME LEVEL
12 HOURS/24 HOURS
button (11) or VOL
button (11) or VOL
USA/EUR
button
button