Avocent Network Device SPC420 Installer/User Manual page 392
Avocent network device user guide
Hide thumbs
Also See for Network Device SPC420:
- Quick installation manual (1 page) ,
- Specifications (2 pages)
Table of Contents
Advertisement
372
DSView 3 Software Installer/User Guide
The socket will power up and the icon for the socket in the content area will change.
3.
To power down a device attached to a power device socket, choose one of the following
actions:
•
Select a socket that has not been powered down and select Tools - Power Off from the
menu bar.
•
Select a socket that has not been powered down and click the Power Off toolbar button.
•
Right-click on a socket that has not been powered down and select Power Off from the
shortcut menu.
The socket will power down and the icon for the socket in the content area will change.
4.
To cycle the power of a device attached to a power device socket, choose one of the following
actions:
•
Select a socket that is powered up and select Tools - Cycle Power from the menu bar.
•
Select a socket that is powered up and click the Cycle Power toolbar button.
•
Right-click on a socket that is powered up and select Cycle Power from the shortcut menu.
The socket will power down, then power up and the icon for the socket in the content area will
change accordingly.
5.
To lock or unlock the current state of a power device socket, choose one of the following
actions:
•
Select a socket and select Tools - Lock or Tools - Unlock from the menu bar.
•
Select a socket that and click the Lock or Unlock toolbar button.
•
Right-click on a socket and select Lock or Unlock from the shortcut menu.
Advertisement
Table of Contents
Need help?
Do you have a question about the Network Device SPC420 and is the answer not in the manual?