EBS LX1NB-5L Installation And Programming Manual page 13

COMMANDS LIST
Change password
Command
Response
Single/Multiple
This command can be used to change current password. Default password is 0000.
Before the password can be changed, at least one admin has to be programmed.
<new password> should be a sequence of digits, length of password should not
exceed 31 digits.
Example: 0000 PASSWORD=1234 will change current '0000' password to '1234'.
Add new admin
Command
Response
Single/Multiple
This command can be used to program administrators' phone number under a given
index.
<index> should be a digit from 0 to 4.
<phone number> should be a phone number with the country code, but
without '00' or '+' prefix. Phone number length should not exceed 31 digits.
Example: 1234 ADMINADD=0,44888777666 will save '44888777666' number under
admin '0' or the first admin.
Get current administrators list
Command
Response
Single/Multiple
This command can be used to get a list of all administrators.
Example: 1234 GETALLADMINS will return a list of all administrators and will look
similar to this:
0:44888777666
1:
2:44900800700
3:
4:
LX1NB-5L Short manual
PASSWORD=<new password>
'Password changed'
SINGLE
ADMINADD=<index>,<phone number>
No response
MULTI
GETALLADMINS
List of all
<index>:<phone number>
SINGLE
or error message
administrators in following format:
Page 13 / 24