Table of Contents
Advertisement
3. CONFIGURATION
3.1. CONFIGURATION TOOL
CAUTION!
GPRS transmitter's configurator and full operation manual, describing how to
use this software may be downloaded at www.ebs.pl
(login: ebs, password: ebs)
To use the configuration tool, please connect the programming cable GD-PROG or
configuration device SP-PROG into the PROG socket. Select the programming mode and
wait for the device to enter the service mode (OK LED on, ST LED blinking). Start the
configuration tool.
To read the current configuration, please select
connection you wish to use, enter the Service Code (default: 1111) and press
Read
.
To save the new configuration, please select
connection you wish to use and enter the Service Code (default: 1111). In
addition, you can set the date and time. Press
First run
3.1.1.
File->Connections
Select
put in a name, select the correct COM port and press the
connection should appear on the list below the
right corner of the window. Read the current configuration (explained above). Please
select the 1.Access option and please put in the correct PIN for your SIM card. Save
the new configuration (explained above). You can now insert the SIM Card into the
SIM Card Slot.
LX1NB-5L Short manual
RS232
and on the
Operations->Read.
Operations->Write.
Write.
tab please configure a new connection:
Add
Add
button. Press
Choose the
Choose the
button. The new
Close
in the lower-
Page 10 / 24
- Quick Links:
- Sms Commands
- Programming
Hide quick links:
Advertisement
Table of Contents
