Relay Configuration - EBS LX1NB-5L Installation And Programming Manual

Relay configuration

3.1.2.
Please select the 3. Inputs/Outpus option. Select the
Explanation of the fields:
 Admins - this section allows you configure the administrators
programmed in the device. At least one administrator is required for
the device to work properly.
 Authorization
o Password – this field allows you to set the administrators
password used to authorize text messages sent to the device.
o Account balance check code – this code will be used when a
GETBALANCE command is sent. This code is dependant on the
SIM card operator.
o Allow any number – this option will make the device authorize
any number calling in, activating the relay. Checking this option
will disable the users field.
 Users – this section allows you to manage the user's data base. You
can search the list, add/delete numbers and save or read the list from
a CSV file with the fields separated by semicolons.
 Options
o Callback Enable – checking this option will make the device call
back the user in order to confirm relay activation request.
o Output activation time – this option allow you to set the time for
which the relay will be activated after receiving a call from the
authorized number or the OUTPUT=ON text command. Selecting
the Bi-stable checkbox, will set the output in to toggle mode,
which will activate / deactivate the relay with every authorized
call. OUTPUT=ON command will have a permanent effect in the
toggle mode.
o Periodic
information feature. You can set day period and exact hour at
which periodic information will be sent. Periodic information
contains the number of programmed users, the number of
programmed administrators and the GSM signal strength. Text
messages with this information will be sent to every configured
administrator.
LX1NB-5L Short manual
information – this checkbox will enable periodic
Relay
(OUT 2) tab.
Page 11 / 24