Accessing The Boot Cli; Initiate A Reboot - Cisco ASR 5500 System Administration Manual

Hide thumbs Also See for ASR 5500:

Table of Contents

Accessing the boot CLI

Refer to the Configuring the Boot Stack section in the Software Management Operations chapter for additional

information on boot stack entries and prioritization.

Accessing the boot CLI

To access the boot CLI you must interrupt an in-progress reload (reboot) sequence.

This system recovery process interrupts subscriber service by dropping any existing flows and preventing

traffic from being processed during the boot interval. It should only be initiated as an emergency measure.

ASR 5500 System Administration Guide, StarOS Release 21.5

System Recovery