Asr 5500 System Administration Guide, Staros Release 21.5 - Cisco ASR 5500 System Administration Manual

Configuring the Hexdump Module
• Use the push-interval intervalkeyword to specify the transfer interval (in seconds) when hexdump files
will be pushed to an external file server.
• Use the push-trigger space-usage-percent trigger_percent to specify the disk space utilization percentage
threshold at which an automatic push is triggered and files are transferred to the external server.
• Use the remove-file-after-transfer keyword to specify that the system must delete hexdump files after
they have been transferred to the external file server.
Default: Disabled.
Important
• Use the transfer-mode { pull [ module-only ] | push primary { encrypted-url | url } url [ secondary
{ encrypted-secondary-url | secondary-url } secondary_url ] [ via local-context ] [ max-files files ]
[ max-tasks max_tasks ] [ module-only ] } keywords to specify the transfer mode to be used when
transferring hexdump files to an external file server

ASR 5500 System Administration Guide, StarOS Release 21.5

170
◦ time-limit seconds: Specifies that hexdump records are to be deleted from the hard drive upon
reaching a time limit defined in seconds.
seconds must be an integer from 600 through 2592000.
◦ max-files max_records: Specifies the maximum number of files to purge. If configured to 0, all
records will be purged until the limit is reached.
max_records must be an integer that is of value 0, or from 1000 through 10000.
◦ interval must be an integer from 30 through 3600.
◦ Default: 60
◦ trigger_percent must be an integer from 10 through 80.
◦ Default: 80
This keyword must be enabled for hexdump records.
◦ pull: Specifies that the destination server (L-ESS) will pull the hexdump files.
◦ push: Specifies that the system will push hexdump files to the destination server. This is the default
mode.
◦ primary encrypted-url url: Specifies the primary URL location to which the system pushes the
files in encrypted format.
url must be an alphanumeric string of 1 through 8192 characters.
◦ primary url url: Specifies the primary URL location to which the system pushes the hexdump
files.
url must be an alphanumeric string of 1 through 1024 characters in the format:
//user:password@host:[port]/direct.
◦ secondary encrypted-secondary-url secondary_url: Specifies the secondary URL location to
which the system pushes the files in encrypted format.
secondary_url must be an alphanumeric string of 1 through 8192 characters.
Packet Capture (PCAP) Trace