Verifying And Saving Your Configuration; Verifying The Configuration; Feature Configuration - Cisco ASR 5500 System Administration Manual

Verifying and Saving Your Configuration

This chapter describes how to save your system configuration.
•
•
•

Verifying the Configuration

You can use a number of commands to verify the configuration of your feature, service, or system. Many are
hierarchical in their implementation and some are specific to portions of or specific lines in the configuration
file.

Feature Configuration

In many configurations, you have to set and verify specific features. An example includes IP address pool
configuration. Using the example below, enter the listed commands to verify proper feature configuration.
Enter the show ip pool command to display the IP address pool configuration. The output from this command
should look similar to the sample shown below. In this example, all IP pools were configured in the isp1
context.
context : isp1:
+-----Type:
|
|
|+----State:
||
||++--Priority:
||||
||||+-Busyout:
||||||
vvvvvv
----- --------------------- -------------- ---------------
PG00
PG00
SG00
Total Pool Count: 5
Verifying the Configuration, page 65
Synchronizing File Systems, page 67
Saving the Configuration, page 67
(P) - Public
(S) - Static
(G) - Good
0..10 (Highest
(B) - Busyout configured
Pool Name
ipsec
pool1
vpnpool
C H A P T E R
(R) - Private
(E) - Resource
(D) - Pending Delete
(0) .. Lowest (10))
Start Address Mask/End Address Used
12.12.12.0 255.255.255.0
10.10.0.0 255.255.0.0
192.168.1.250 92.168.1.254
ASR 5500 System Administration Guide, StarOS Release 21.5
6
(R)-Resizing
Avail
----------------
0 254
0 65534
0 5
65