Sess_Uchkpt_Cmd_Pgw_Ubr_Mbr_Info; Sess_Uchkpt_Cmd_Pgw_Update_Apn_Ambr; Sess_Uchkpt_Cmd_Pgw_Update_Info; Sess_Uchkpt_Cmd_Pgw_Update_Li_Param - Cisco ASR 5500 System Administration Manual

P-GW Category

SESS_UCHKPT_CMD_PGW_UBR_MBR_INFO

This micro-checkpoint is sent at the end of a UBR (Update Bearer Request ) or MBR (Modify Bearer Request
) except when the UBR /MBR procedure results in the following scenarios:
• TFT change
• Bearer updat or modification for a collapsed call
• Pure P to collapsed or collapsed to Pure P change
• Inter-technology handoff, for example, WiFi to LTE
Parameters associated with this micro-checkpoint are show below.
• Time based: No
• Frequency: N/A
• Event based: yes
• Events: Occurs as a result of a UBR or MBR procedure.
• Accounting: No
• Delta/Cumulative: N/A
• CMD-ID: 193
• Related CLI command: show srp checkpoint statistics active verbose and show session subsystem
facility sessmgr instance <instance_number> debug-info.

SESS_UCHKPT_CMD_PGW_UPDATE_APN_AMBR

Reserved for future use.

SESS_UCHKPT_CMD_PGW_UPDATE_INFO

Reserved for future use.

SESS_UCHKPT_CMD_PGW_UPDATE_LI_PARAM

This micro-checkpoint indicates the state of Lawful Intercept (LI) for this call.
• Time based: No
• Frequency: N/A
• Event based: Yes
• Events: Triggered when there is a change in the LI state for this call.
• Accounting: No
• Delta/Cumulative: N/A
• CMD-ID: 151
ASR 5500 System Administration Guide, StarOS Release 21.5
380
ICSR Checkpointing