Setup The System - Uponor Smatrix Move PLUS Quick Manual

UK
15. Thermostat T-166, T-167 and T-168
15.1 Press and hold the OK button on the
CZ
thermostat for about 5 seconds to enter the
settings menu. The settings icon and menu
numbers are displayed in the top right corner
DE
of the display.
15.2 Use buttons - or + to change the numbers
DK
to 04 and press OK. Current control mode is
displayed (RT, RFT, RS or RO).
15.3. Use buttons - or + to change control mode to
EE
RO and press OK.
15.4 Use buttons - or + to change the numbers
ES
to 09 and press OK. The text Int YES
is displayed, if the thermostat already is
registered as a reference room thermostat.
FI
15.5. Use buttons - or + to change Int YES to Int
CNF.
FR
15.6. The connection indicator starts fl ashing in
the thermostat display to show that the
registration process begins.
HR
15.7 The current outdoor temperature is shown in
the controller display, and the text Int YES
is shown in the thermostat display when the
HU
registration is complete.
15.8 Press and hold the OK button on the
IT thermostat for about 5 seconds to exit the
settings menu, or wait about 70 seconds for
the software to exit itself.
LT
Thermostat T-163
15.1 Gently press and hold the registration button
on the thermostat, release when the LED
LV
starts fl ashing green (located in the hole
above the registration button).
NL
15.2 The current outdoor temperature is shown in
the controller display when the registration
is complete. It might take some time for the
NO
thermostat to send the current temperature
data to the controller. 00.0 is displayed in the
meantime.
PL
16. Press the OK button on the controller to confi rm
the change and return to the system parameter
settings.
PT
RO
RU
SE
SK
1 2
Q U I C K G U I D E
End registration
17. Use buttons < or > to locate parameter 24 (End)
– Exit system parameter settings.
18. Press the OK button to exit the system parameters
menu.

Setup the system

Change the system parameter settings to setup the
system.
1
10 s
3
4
0h
5
N O T E !
If system parameter settings are to be
changed, go to section Setup the system >
Step 3.
2
0h
1 2 3 4 5 6 7
13
14 12
15 11
16 10
17 9
18
19
20 6
21 5
22 4
23 3
24 2
0h 1
1
6
24
AUTO
0h 2 4 6 8 10
U P O N O R S M AT R I X M O V E P L U S · Q U I C K G U I D E
8
7
24
P
12 14 16 18 20 22 24