Advertisement
FIG.J
FIG.K
IFC17019.01
www.powercommander.com
7
Attach the connectors from the PCFC wiring harness to the stock wiring
harness and throttle body harness as shown in Figure J.
8
Attach the ground wire from the PCFC harness to the ground bolt on the
shifter bracket as shown in Figure K.
9
Secure the PCFC harness clear of any hot or moving parts.
10
Reinstall the clutch snorkel if removed.
11
Reinstall the plastic covers, shifter knob, key switch, and seat.
2008-2014 Kawasaki Brute Force 750 - 6
Advertisement
Need help?
Do you have a question about the Power Commander FC and is the answer not in the manual?
Questions and answers