Advertisement
Hampton Creek
Server Express
™
MODEL: SE-SS
Used with pouches
up to 1½ gallons
with 16mm fitments.
07952
Includes set of 3
magnetic graphics.
Thank You
...for purchasing our Server Express™ Pouched
Condiment Dispenser. This portion controlled unit is
sealed and sanitary, achieves excellent evacuation and
has only a few parts for easy clean-up.
SIMPLIFY CONDIMENT MANAGEMENT— GO POUCHED
Advertisement
Table of Contents
Related Manuals for Server Server Express SE-SS 07952
Summary of Contents for Server Server Express SE-SS 07952
- Page 1 07952 Includes set of 3 magnetic graphics. Thank You ...for purchasing our Server Express™ Pouched Condiment Dispenser. This portion controlled unit is sealed and sanitary, achieves excellent evacuation and has only a few parts for easy clean-up. SIMPLIFY CONDIMENT MANAGEMENT— GO POUCHED...
- Page 2 Check with local food and safety regulators for specific guidelines. Server Products, Inc. cannot be NSF International lists this pump as: responsible for the serving of potentially hazardous “Not acceptable for dispensing potentially...
-
Page 3: Pump Assembly
PUMP ASSEMBLY WASH ALL PARTS PROPERLY BEFORE USE. See page 7. INSERT PINCH VALVE into pump housing. TIP: Squeeze the pinch valve open before installation to ensure it isn’t stuck shut. INSTALL DOME Press dome into Wrap loop housing fully. around lower opening to Ensure valve flap... - Page 4 SETUP PRACTICE SAFETY. WASH ALL PARTS PROPERLY BEFORE USE. See page 7. ATTACH POUCH TO PUMP Firmly press piercing connector into center of pouch fitment. An audible click indicates CLICK a secure connection. DROP IN Slide pouch and pump into pouch support within shroud.
-
Page 5: Portion Control
PRIME PUMP Press lever several times until you see product in discharge tube. APPLY MAGNETIC GRAPHIC to indicate product dispensed. Align top edge of magnet to the top edge of shroud face. PORTION CONTROL THE LID IS SET TO DELIVER 1 OZ PORTIONS. If lid reassembly is needed: One hinge pin attaches lever to lid. - Page 6 TAKEDOWN & DISASSEMBLY REMOVE LID REMOVE PUMP & POUCH DETACH PUMP FROM POUCH FLUSH & RINSE PUMP Place lower end of pump into container of hot water. Pump until all remaining product is expelled and only water flows from discharge tube. DISASSEMBLE Page 6...
-
Page 7: Care Of Stainless Steel
CLEANING CLEAN After disassembling, clean all washable parts YES! with soap and hot water. Use brush to clean any confined areas. Use dishwashing soap and hot water • External surfaces may be wiped clean with a clean damp cloth. RINSE •... -
Page 8: Troubleshooting
Server Products customer service to request a Return Authorization Number. Merchandise must be sent to Server Products with this number. Service is extremely prompt. Typically, units are repaired Server Products equipment is backed by a and ship out within 48 hours of receipt.
Need help?
Do you have a question about the Server Express SE-SS 07952 and is the answer not in the manual?
Questions and answers