Be aware of the product you are serving and the 21 7/16” x 11 1/2” temperature the product is required to maintain. Server Products, Inc. can not be responsible for the serving of potentially hazardous product. Server Products Inc. claims no responsibility for actual serving temperature of product.
UNIT SETUP PORTION CONTROL ALWAYS CLEAN UNIT AND PUMP THOROUGHLY Portion control is the amount of product which will BEFORE EACH USE. SEE SAFETY GUIDELINES, UNIT dispense from pump with each full push of lever. TAKE-DOWN, PUMP DISASSEMBLY, CLEANING, AND The roller, which is attached to the bottom of the lever, PUMP ASSEMBLY.
Page 4
ICE PACK TRAY Ice Pack & Shroud Assembly (Server Part 100629) includes 6 ice packs, 2 ice pack retainer strips, and 1 ice pack shroud. DISASSEMBLY DISASSEMBLY Ice packs can be removed and replaced Wider flange toward the top. individually from tray if necessary and for cleaning.
PUMP DISASSEMBLY PUMP CLEANING BEFORE FIRST USE AND AFTER USE DAILY, REMOVE CONNECTOR FROM FLEXIBLE PLASTIC DISASSEMBLE AND CLEAN PUMP. IT IS TUBE. IMPORTANT TO CLEAN, RINSE, SANITIZE, AND DRY THESE PARTS DAILY AND PROPERLY. ROTATE AND PULL CONNECTOR AWAY FROM FAILURE TO COMPLY WITH ANY OF THESE FLEXIBLE PLASTIC TUBE.
BEFORE FIRST USE AND AFTER USE DAILY, DISASSEMBLE AND CLEAN PUMP AND UNIT. STAINLESS STEEL PARTS CAN CORRODE. Before sending an item to Server Products, contact IT IS IMPORTANT TO CLEAN, RINSE, SANITIZE, Customer Care to request a Return Authorization AND DRY THESE PARTS DAILY AND PROPERLY.
Need help?
Do you have a question about the Express SEI-5 and is the answer not in the manual?
Questions and answers