Advertisement
INSTALLATION *
E
6
A
1. Mark and drill the holes on the surface
where the screw holes of the Bracket
[F] will be mounted.
2. Mount the Bracket [F] onto the wall,
using the Screws [D].
B
3. Assemble the Camera [C] and the
Bracket [F].
4. Loosen the Fixed Screw [E] to adjust
C
the direction of the camera.
5. After it is adjusted to the desired
position, tighten the Fixed Screw [E]
D
6. Loosen the Top Camera Screw [A] to
adjust the position of the Sun Cover
[B].
7. Tighten the Top Camera Screw [A]
after the Sun Cover [B] has been
adjusted to its desired position.
F
CONNECTION *
110.0
81.1
8.7
CAUTION : CHECK FOR POLARITY WHEN USING A DC12V POWER SUPPLY.
VIDEO(YELLOW)
BNC JACK
VCC(RED)
7
Advertisement
