Verify System Is Operational; Contact Technical Support - Primex XR Quick Install Manual

Switch
1
2
3
4
5
6
7
8

Verify System is Operational

The final step is to verify the system is operating and functional.
1. Verify a GPS signal or NTP time has been received.
2. Verify the Time and Date are correct.
3. Verify the Channel Number is set correctly.
4. Verify the transmitter does not have any error codes.

Contact Technical Support

Technical Support
Telephone
Email
Fax
Hours
Web
Primex Wireless
Function
NTP/GPS
LAN/Local
Aux 3
(setting unassigned)
Aux 4
(setting unassigned)
-30M
UTC Offset
Daylight Saving Time
12-Hour or 24-Hour Time
(800) 404-8112
techsupport@primexinc.com
(262) 248-0061
7:00 am to 7:00 pm CST | Monday through Friday
www.primexwireless.com
UK 1/2 Watt Transmitter - Internal Antenna Quick Install Guide
Up Position Down Position
Receiving time from a GPS receiver.
Receiving time from
NTP server.
Local USB and/or serial port attached to
LAN network
unit is enabled.
connection is
enabled.
Required for use of
NTP time source.
Not applicable
Not applicable
Not applicable
Not applicable
-30 minute off set disabled
-30 minute offset
enabled
(default position)
Transmitter is
installed in
Newfoundland or
other countries with
a -30 minute off set.
Transmitter is installed in North America
Transmitter is installed
in Europe.
Daylight Saving Time enabled.
Daylight Saving Time
disabled.
12 hour time display.
24 hour time display.
5