Appendix C: Troubleshooting; Table 27: Displayed Messages - Motorola MTP3100 User Manual

Appendix C
Troubleshooting
Your radio displays the following messages:

Table 27: Displayed Messages

Message
...-Received
Attachment Failed
Authenticate Failure
Battery level too low.
Call Cancelled
Call Ended
Call Forwarding
Call Modified
Call Preempted
Decryption Failed:
Emergency In Use
Wait For Mic
Emgcy Mic Ended
Emergency Mic On
Empty Entry
Faulty Unit
Error
Gateway available
Send Feedback
Message Description
Call received but not answered, or rejected.
Your radio could not perform talkgroup attachment. It
keeps on trying. If it does not succeed, try another talk-
group.
Your radio could not register on an authenticated system
(for example, the Authentication Key is incorrect, or au-
thentication is disabled).
The battery charge level is too low to perform the required
operation.
You have canceled the call.
• Faulty channel. Please try later.
• You have ended the call.
The radio you are trying to call is not available and the call
is being forwarded to another radio.
The call you are participating in has been modified.
Channel being used for priority.
An error occurred while decrypting a message or call.
The Hot Microphone feature is active, but the channel
transmit grant has been given to another Emergency call
on the same talkgroup. Your radio microphone is not ac-
tive during this time, but it automatically tries to regain talk
permit after a predetermined time.
The Hot Microphone timer automatically expired, or you
pressed the PTT button to cancel the Hot Microphone fea-
ture.
The Hot Microphone feature is active, and your radio is au-
tomatically transmitting hands free emergency audio.
The speed number you dialed does not exist, or the num-
ber exists but the group is non-selectable.
Self-test failed. An operational fault has been detected with
your radio. Record the error number. Turn your radio off
and contact service.
Your radio has connected to a gateway.
68015000897–FC
Troubleshooting
Table continued...
127