NOTICE: Infrastructure synchronizes the time and date. When not within the infrastructure
signal range you can set the values manually.
4.7.8.1
Setting the Time Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Format → Format Time.
3 Select one of the following:
•
12-Hour – Displays the time with am (before noon) or pm (after noon) indication.
•
24-Hour – Displays the time in 24 hour format.
4.7.8.2
Setting the Time Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Set → Set Time.
3 Enter current time using Navigation keys.
4 Press Done.
4.7.8.3
Setting the Date Format
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Format → Format Date.
3 Select (D – day, M – month, Y – year):
•
DD/MM/YY
•
MM/DD/YY
•
DD-MON-YY
•
YY/MM/DD
4.7.8.4
Setting the Date Manually
When and where to use: If the time cannot update automatically through the infrastructure.
Procedure:
1 From the home screen, press the Menu key.
2 Select Setup → Time & Date → Set → Set Date.
3 Enter current time using Navigation keys.
4 Press Done.
Send Feedback
68015000897–FC
Chapter 4: Main Menu
85