Appendix A: Tones; Table 24: Radio Tones - Motorola MTP3100 User Manual

Appendix A
Tones
NOTICE: The radio has two tone packs which are the default Classic Tones and New Tones.
Your service provider decides which tone pack is enabled. To listen to the audio signal tones
samples, click

Table 24: Radio Tones

New Tone Classic Tone
Send Feedback
.
Tone Description
Default Beep – Played when pressing a key.
Invalid Action
Examples:
• Pressing an invalid key.
• Dialing an invalid number.
• Talk prohibit.
System Notification
Examples:
• The radio changes its status from out-of-range to in service.
• The radio returns to the home network.
• Toggling between TMO and DMO modes.
System Error
Examples:
• The radio changes its status from in service to out-of-range.
• Call disconnected.
General Notification
Examples:
• Entering Local Site Trunking.
• Entering Transmit Inhibit Mode.
Positive Notification – Message sending succeeded.
Negative Notification – Message sending failed.
Item Received – A new message received.
Talk Permit – The radio user is allowed to transmit after pressing
the PTT button.
Clear-to-send – Data transmission is ready to begin.
Emergency – Emergency Call received.
68015000897–FC
Tones
Table continued...
123