Password Check; Loading Language Files - Psion Teklogix Vehicle-Mount Computer 8590 User Manual

Chapter 6: Operating System & Software Applications

Password Check

6.2.2.7
If a password was entered in the Psion Teklogix Config Settings menu, it will be
requested when the program is launched. The password is case-sensitive; the
program terminates after three incorrect entries.
The default password is gold.
• Change the default password in the Settings menu to suit your needs.
6.2.2.8
Text files for Psion Teklogix Config are loaded when the program is started. If a text
file is not available in the desired language, the system default text is used for the
dialogs.
Supported Language Codes
The following language codes are supported during text file loading. Currently only
ENG and GER are available. Other languages can be created as needed. (Refer to
Command line parameters in the table below.)
Only ASCII files can be loaded at this time. UNICODE is not supported.
Command Line Parameters
The parameter MAKETEXT is available to translate software into foreign languages.
This means text resources can be exported to *.txt files. Each time a file is created, a
message appears prompting the user to confirm it. You just need to add the language
code to the end of this newly generated text file.
For example, Psion TeklogixCfg_.txt would then be Psion TeklogixCfg_GER.txt if it
contained the German text. During text file generation, files with the same name are
automatically overwritten. English is the system default language. It does not need
to exist as a text file. The program terminates once the text files have been
generated.
66 8580/8590 Vehicle-Mount Computer User Manual
Password Check

Loading Language Files

ENG English
GER German
FRA French
ESP Spanish
SWE Swedish
ITA Italian
CHS Chinese
KOR Korean
DNK Danish
JPN Japanese
GRC Greek