Settings - Psion Teklogix Vehicle-Mount Computer 8590 User Manual

Set boot command (BootCmd)
No command
Activate write protection
(ENABLE)
Deactivate write protec-
tion (DISABLE)
Deactivate and take over
(DISABLE+COMMIT)
Take over changes
• Tap Set Command to apply the settings.
• Tap the Exec. Restart button to restart the computer and activate
the settings.
6.2.3.9

Settings

In this menu, Psion Teklogix Config is configured with respect to password,
language etc.
Chapter 6: Operating System & Software Applications
The set boot commands are deactivated again.
Activates write protection: All system changes are written
exclusively to the main memory; they are discarded when
the computer is restarted.
To activate this setting, reboot the computer!
Disables write protection.
To activate this setting, reboot the computer!
This setting is a combination of Deactivate write protection
and Take over changes: Write protection is deactivated;
changes are applied.
Temporarily deactivates write protection in order to
commit current changes to the system. Once finished,
write protection is immediately active again.
8580/8590 Vehicle-Mount Computer User Manual
Settings
79