Usb Configuration Sub-Menu - Psion Teklogix Vehicle-Mount Computer 8590 User Manual

Appendix E: BIOS

USB Configuration Sub-Menu

Feature
Block (Multi-
Sector Transfer)
PIO Mode
DMA Mode
S.M.A.R.T.
32 Bit Data Trans-
fer
E.5.8 USB Configuration Sub-Menu
Feature
USB Functions
USB 2.0 Control-
ler
E-12 8580/8590 Vehicle-Mount Computer User Manual
Options
Set to AUTO to let the BIOS auto detect device
support for multisector transfer. The data trans-
fer to and from the device will occur multiple
Disabled (the number of sectors, see above) sectors at a
Auto time.
Set to Disabled to prevent the BIOS from using
block mode. The data transfer to and from the
device will occur one sector at a time.
Auto Set to AUTO to let the BIOS auto detect the
0, 1, 2, 3, 4 supported PIO mode.
Auto Set to AUTO to let the BIOS auto detect the
SWDMA0, 1, 2 supported DMA mode.
MWDMA0, 1, 2 SWDMA = Single Word DMA
UDMA0, 1, 2, 3, MWDMA = Multi Word DMA
4, 5, 6 UDMA = Ultra DMA
Set to AUTO to let the BIOS auto detect hard
disk drive support.
Auto
Set to Disabled to prevent the BIOS from using
Disabled
SMART feature.
Enabled
Set to Enabled to allow the BIOS to use
SMART feature on supported hard disk drives.
Disabled Enable/Disable 32 bit data transfers on sup-
Enabled ported hard disk drives.
Options
Disabled Disable ICH6M USB host controllers.
2 USB ports Enable UHCI host controller 0.
4 USB ports Enable UHCI host controller 0 + 1.
6 USB ports Enable UHCI host controller 0 + 1 + 2.
Enabled Enable the ICH6M USB 2.0 (EHCI) host con-
Disabled troller.
Description
Description