Chapter 4: 8580/8590 Installation; Complying With Protection Standard Ip65; Parts List For Cable Cover Kit - Psion Teklogix Vehicle-Mount Computer 8590 User Manual

Warning: In order to comply with the IP65 protection standards, you must
install the 8580/8590 cover guard, secure the cables and seal the
unit BEFORE mounting the unit using a mounting bracket.

4.1 Complying With Protection Standard IP65

The 8580/8590 is sealed against dust and protected against water jets (IP65),
provided that the following conditions are fulfilled:
• The cable cover is fitted.
• The sealing rings supplied are used for mounting the cables, and are sealed
with silicone.
• The unused cable sockets are blocked with sealing plugs and are sealed off
with silicone.
• The cables are secured in the cable cover with grounding plates
• The pressure equalisation element (PEE) in the cable cover should not be
sealed or otherwise made airtight.

4.1.1 Parts List For Cable Cover Kit

You'll need the following parts in order to comply with IP65 standards (from left to
right in the Figure 4.1 on page 40):
• 1 cable cover with pressure equilisation element (7 partially threaded
screws are already fitted)
• 1 grounding bar
• 3 special screws
• 2 grounding plates
• 8 M3 screws
• 1 Silicone syringe
• 4 sealing rings 3-6.5mm
• 2 sealing rings 5.5-9mm

Chapter 4: 8580/8590 Installation

Complying With Protection Standard IP65

8580/8590 Vehicle-Mount Computer User Manual 39