Remove the heatsink.
5.
To replace the component, reverse the removal procedure.
Processor
WARNING:
internal system components to cool before touching them.
IMPORTANT:
To remove the component:
Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
Remove the heatsink.
5.
To reduce the risk of personal injury from hot surfaces, allow the drives and the
Processor socket 1 must be populated at all times or the server does not function.
Removal and replacement procedures 48