Dimms; Dimm Tool Location; Replacing The Dimm - HP ProLiant XL730f Gen9 User And Maintenance Manual

Remove the I/O slot card from the I/O bracket.
7.
To replace the component, reverse the removal procedure.

DIMMs

DIMM tool location

The DIMM tool is used to open and close the DIMM release latch.

Replacing the DIMM

To remove the component:
Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
Removal and replacement procedures 45