Processor Heatsink - HP ProLiant XL730f Gen9 User And Maintenance Manual

Close the DIMM bracket.
7.
To replace the component, reverse the removal procedure.

Processor heatsink

WARNING:
before touching it.
CAUTION:
with the water wall.
To remove the component:
Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
To reduce the risk of personal injury from hot surfaces, allow the heatsink to cool
To avoid damage to the heatsink, do not touch the edge where the heatsink aligns
Removal and replacement procedures 47