Front Panel I/O Board - HP ProLiant XL730f Gen9 User And Maintenance Manual

Install the drive cage.
2.
Install the access panel (on page 12).
3.
Install the server
4.
Connect peripheral devices to the server.
5.
Power up the server
6.

Front panel I/O board

CAUTION:
so results in improper airflow that can lead to thermal damage.
To remove the component:
Power down the server (on page 9).
1.
Disconnect all peripheral cables from the server.
2.
Remove the server (on page 10).
3.
Remove the access panel (on page 11).
4.
("Installing the server" on page 14).
("Powering up the server" on page 14).
Replace all cut cable ties during a removal and replacement procedure. Failure to do
Removal and replacement procedures 42