Table of Contents
Advertisement
If the logical drive was Functional when the Redundancy Check began, you
can pause and resume the Redundancy Check process with this same
function.
If the Maintenance Activity Monitor is enabled, you can watch the
Redundancy Check progress on your monitor.
Media Patrol
Use this function to verify the integrity of the magnetic media on the physical
drives that make up your logical drive.
1.
Press 7 and Enter to access Media Patrol.
Current MP Information:
MP: disabled
Percentage: 0%
---------------------------------------------------
Media Patrol(MP)
1. Enable/Disable MP
2. Pause
R. Return to Previous Menu
Please enter your menu choice>1
Enable MP(y/n)?>y
2.
Do one of the following:
•
Press 1 and Enter to enable/disable Media Patrol. Then press Y and
Enter to confirm.
•
Press 2 and Enter to pause/resume Media Patrol. Then press Y and
Enter to confirm.
3.
When you are done, press R and Enter to return to the Maintenance menu.
If the Maintenance Activity Monitor is enabled, you can watch the Media
Patrol progress on your monitor.
Chapter 5: Management with the CLU
187
Advertisement
Table of Contents
