Table of Contents
Advertisement
CLU Connection
There are two connections methods for the CLU:
•
Serial – Requires a null modem cable (included with VTrak) to connect the
serial ports on the Host PC and VTrak
•
Telnet – Requires a network connection between the Host PC and VTrak's
Management Port.
Serial Connection
Before you begin, be sure the null modem cable is connected between the Host
PC and VTrak, and that both machines are booted and running.
1.
Start your PC's terminal emulation program.
2.
Press Enter once to launch the CLU.
Telnet Connection
If your Telnet connection has not been setup, refer to Chapter 2.
To start the telnet program,
1.
Go to the command line prompt (Windows) or click the terminal icon (Linux),
then run:
telnet 192.168.1.56 2300
The IP address above is only an example. Use your VTrak's Management
port IP address. 2300 is the Telnet port for the VTrak.
The telnet login screen appears:
Telnet Login
Please enter your user name>administrator
Please enter the password for user administrator>*******
2.
Type the user name and password.
The default user name is administrator. The default password is password.
The CLU Main Menu appears.
Chapter 5: Management with the CLU
137
Advertisement
Table of Contents
