Table of Contents
Advertisement
11
12
Enter Physical Drive ID to select.
Press R to continue after you have finished
selecting Physical Drive.
Your input?>9
3.
If you change to a Dedicated hot spare drive, type the ID number of one
available physical drive and press Enter.
*********Physical Drives Selection*********
ID
------------------------------------------------------------
*9
11
12
Enter Physical Drive ID to select.
Press R to continue after you have finished
selecting Physical Drive.
Your input?>r
4.
Press R and Enter to confirm the hot spare drive policy change.
The Screen returns to the Disk Array Properties menu.
Note: Be sure Auto Rebuilding is enabled (below).
Auto Rebuilding
Use this feature to enable the automatic rebuilding of a disk array that has gone
critical. This function must be enabled in order for a hot spare drive to work. See
Hot Spare Policy, above. To rebuild a disk array manually, see .
1.
Press 9 and Enter to access the Auto Rebuilding Option.
Enable auto rebuilding for Disk Array 1(y/n)?>y
2.
Press Y and Enter to enable Auto Rebuilding. Press N and Enter to leave
the setting unchanged.
The Screen returns to the Disk Array Properties menu.
PDM Auto Start
PDM (Predictive Data Migration) is a maintenance operation. VTrak checks
the bad block remapping table and keeps a count of disk drive errors. When
these reach the user-specified limits, PDM will migrate the data from the
suspect disk drive to a replacement.
ST380013AS
WDC WD1200JD-00FYB0
Name
WDC WD1200JD-00FYB0
ST380013AS
WDC WD1200JD-00FYB0
169
Chapter 5: Management with the CLU
80 GB
120 GB
Capacity
120 GB
80 GB
120 GB
Advertisement
Table of Contents
