Connecting Wirelessly Using The Configuration Wizard - Fritz! DVB-C Installation And Operation Manual

Connecting Wirelessly Using the Configuration Wizard

4.2 Connecting Wirelessly Using the Configuration Wizard
If you cannot use WPS, establish the wireless connection us-
ing the configuration wizard.
The configuration wizard is started in the web browser.
Requirements
•
•
•
•
In the presettings of the latest FRITZ!Box models the SSID is
visible and the MAC address filter is disabled.
Establishing a Wireless Connection
1.
2.
3.
4.
FRITZ!WLAN Repeater DVB-C
The "WLAN Bridge" operating mode must be set in the
FRITZ!WLAN Repeater (preconfigured upon delivery of
the FRITZ!WLAN Repeater).
DCHP must be enabled on the computer; see
an IP Address Automatically
The SSID (radio network name) of the wireless access
point must be set to "visible" (announced).
If the MAC address filter of the wireless access point is
enabled, the MAC address of the FRITZ!WLAN Repeater
must be entered as an exception.
Connect the FRITZ!WLAN Repeater to an electrical outlet
in the vicinity of the FRITZ!Box.
Connect the FRITZ!WLAN Repeater to a computer using
the network cable included with delivery.
Start a web browser on the computer.
Enter the address http://fritz.repeater.
The configuration wizard starts.
17
Obtaining
on page 41.