Help In Case Of Errors; Leds Not On; The User Interface Is Not Displayed - Fritz! DVB-C Installation And Operation Manual

Help in Case of Errors

14 Help in Case of Errors
14.1

LEDs Not On

The LEDs on the FRITZ!WLAN Repeater do not light up.
Cause
The FRITZ!WLAN Repeater has no electricity.
Help
•
•
Cause
The LEDs have been disabled.
Help
Open the user interface (see
menu, enable the "LED display on" option and click "Apply".
14.2

The User Interface Is Not Displayed

The user interface of the FRITZ!WLAN Repeater is not
displayed in the web browser.
Cause
The address "fritz.repeater" cannot be reached.
Help
Open the network overview of your wireless access point.
Make note of the IP address of your FRITZ!WLAN Repeater. En-
ter this address in the address field of your browser.
If the connection to the wireless access point is interrupted,
connect your computer to the FRITZ!WLAN Repeater using the
LAN cable included with delivery. Then enter the IP address
http://192.168.178.2
FRITZ!WLAN Repeater DVB-C
Make sure that the FRITZ!WLAN Repeater is connected to
electrical power.
Make sure that the electrical outlet is active.
33
page 22). In the "System / LEDs"
in the address line of your browser.